Under Bench Cleaners (900mm)
SCD G9 | SCD 2590 165lt
Machines equipped with a manual opening and closing door made in double tempered glass (SCD G9) or stainless steel (SCD 2590), for laboratory glassware with 2 independent levels. Both cleaners are equipped with a system that filter, electrically heat and force, with a powerful blower, the air in the wash chamber and inside the hollow instruments, to obtain an excellent drying result. A wide range of racks, nozzles and accessories complete these machines, suitable to wash and dry a wide variety of laboratory glassware.
SCD G9
External dimension (WxDxH): 900x650x845 mm
Chamber dimension (WxDxH): 550x500x600 mm
Max. pump flow rate: 370 l/mn
Max. drying fan flow rate with filter: 180 m3/h
Max. absorbed power: 6.2 kW
Standard/max. number of dosing pumps for chemicals with flowmeters: 2/4
Chemical tank capacity: 5l
SCD 2590
External dimension (WxDxH): 900x650x845 mm
Chamber dimension (WxDxH): 550x500x600 mm
Max. pump flow rate: 370 l/mn
Max. drying fan flow rate with filter: 180 m3/h
Max. absorbed power: 6.2 kW
Standard/max. number of dosing pumps for chemicals with flowmeters: 2/4
Chemical tank capacity: 5l
SCD G9
USB SLAVE interface for PC
USB HOST interface for FLASH DRIVE
Interface for external printer or data connection exchange
Touch panel with colour graphic display
Certified according to standards 2006/42/EC, 2014/35/EU, 2011/65/EU, 2014/30/EU, EN61010-1, EN 61326-1
Certificated plumbing system, designed to isolate the potable water pipe-line system (water gap) as prescribed by European Standard EN 1717
Manual door with interlock
Forced air drying
Wash chamber made of high-quality stainless steel; AISI 316L (EN1.4404)
Hot water connection
Cold water connection
HEPA H14 filter
Conductivity probe
Cold/hot water softener system
Wash chamber LED light
Demineralised water connection
Spray arm monitor
Built-in printer installed in the side panel (optional)
SCD 2590
USB SLAVE interface for PC
USB HOST interface for FLASH DRIVE
Interface for external printer or data connection exchange
Touch panel with colour graphic display
Certified according to standards 2006/42/EC, 2014/35/EU, 2011/65/EU, 2014/30/EU, EN61010-1, EN 61326-1
Certificated plumbing system, designed to isolate the potable water pipe-line system (water gap) as prescribed by European Standard EN 1717
Manual door with interlock
Forced air drying
Wash chamber made of high-quality stainless steel; AISI 316L (EN1.4404)
Hot water connection
Cold water connection
HEPA H14 filter
Conductivity probe
Cold/hot water softener system
Demineralised water connection
Spray arm monitor
Built-in printer installed in the side panel (optional)
25F01076. Lower Rack
Washing rack positioned on the lower level, basic version
Suitable for washing the following glassware:
Breakers, Jugs, Mugs, Buckets, Cans, Jars, Funnels, Powder funnels, Imhoff cones
Internal loading dimensions WxD: 500x485 mm
Rack external dimensions WxDxH: 525x502x148 mm
25F01077. Lower Rack 195 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01078. Lower Rack 110 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01079. Lower Rack 72 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01080. Lower Rack 56 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01081. Lower Rack 41 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01082 Lower Rack 25 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01083 Lower Rack 18 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01084. Lower Rack 16 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01085 Lower Rack 9 Pos.
Washing rack positioned at the lower level
Rack external dimensions WxDxH: 525x497x148 mm
25F01086. Lower Rack 48 Pos. Pip.
Washing rack for pipettes positioned at the lower level
Rack external dimensions WxDxH: 525x497x313 mm
25F01087. Lower Rack 2 Cass. Pip.
Pipettes washing rack positioned at the lower level, with 2 cassettes
Rack external dimensions WxDxH: 525x497x346 mm
25F01088. Upper Rack W/S. Arm
Washing rack positioned on the upper level, with spray arm
Suitable for washing the following glassware:
Breakers, Jugs, Mugs, Buckets, Cans, Jars, Funnels, Powder funnels, Imhoff cones
Internal loading dimensions WxD: 485x465 mm
Rack external dimensions WxDxH: 530x483x164 mm
25F01089. Upper Rack 195 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01090. Upper Rack 110 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01091. Upper Rack 72 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01092. Upper Rack 56 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01093. Upper Rack 36 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01094. Upper Rack 25 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01095. Upper Rack 18 Pos.
Washing rack positioned at the upper level
Rack external dimensions WxDxH: 530x483x164 mm
25F01096 Raising Grid
Raising grid suitable for washing racks positioned at upper level
Grid external dimensions WxDxH: 477x456x51 mm
25F01064 Stainless Steel Stand
Stand for SCD G6, SCD 2560 and SC2560 provides an ergonomic height
of 150 cm, if machine is not installed undercounter. Suitable for use as a
detergent storage compartment.
Stand external dimension WxDxH: 600x585x600 mm
25F01065 Stainless Steel Stand
Stand for SCD G9 and SCD 2590 provides an ergonomic height of 150 cm,
if machine is not installed undercounter. Suitable for use as a detergent
storage compartment.
Stand external dimension WxDxH: 900x585x900 mm
25F01066 Stainless Steel cabinet (free standing) with Door
External dimensions WxDxH: 300x580x845 mm
25F01067 Stainless Steel cabinet (free standing) with Drawer
External dimensions WxDxH: 300x580x845 mm
Standard Nozzles ø 4 mm
Suitable for washing the following glassware:
High capacity flasks, Graduated cylinders
Standard Nozzles ø 6 mm
Suitable for washing the following glassware:
High capacity flasks, Graduated cylinders
Nozzle with flexible internal ø 6 mm
With 3 flexible internal arms to block glassware during washing
Suitable for washing the following glassware:
Imhoff cones, Graduated cylinders, Weighing bottles, Erlenmeyer Flasks, Bottles
Nozzle with flexible external ø 6 mm
With 3 flexible external arms to block glassware during washing
Suitable for washing the following glassware:
Erlenmeyer flasks narrow neck, Flat or round bottom flask narrow neck, Funnels, Graduated cylinders
Nozzle with rigid internal ø 6 mm
With rigid bottle holder to block glassware during washing
Suitable for washing the following glassware:
Erlenmeyer Flasks, Bottles
Standard or with rigid cap nozzles ø 2.5 mm
Standard or with internal rigid cap to block small glassware during washing
Suitable for washing the following glassware:
Erlenmeyer Flasks, Bottles, Test tubes, Low capacity flasks, Centrifuge tubes
25F01324. CAP Screw M8x1
Hexagon head screw with M8x1 thread
To be screwed to the positions of the rack where the nozzles are not placed, to allow
the passage of the washing water only in the occupied positions
25F01325. Test Tubes Basket H=160
Test tube basket
Use up to 4 baskets per cart.
Suitable for washing the following glassware: Test tubes
Maximum tube height: 150 mm
25F01326. Insert for petri dishes
Capacity: 30 pcs. petri dishes
External dimensions WxDxH: 470x240x77 mm
25F01327. Bott. rigid support ø33
Bottle holder ø 33mm for nozzles with rigid inside ø 6mm
25F01328. Bott. rigid support ø45
Bottle holder ø 45 mm for nozzles with rigid inside ø 6 mm
